18x of CROWN Macro-Tech 5002VZ Stereo Power Amplifier-----18000Euro
SPECIFICATIONS OF THE MA-5002VZ AE Macro-Tech Anniversary Power Amp
2-ohm dual (per ch.) 2,500W @ 1kHz power, 2,155W @ 20Hz-20kHz power
4-ohm dual (per ch.) 2,000W @ 1kHz power, 1,775W @ 20Hz-20kHz power
8-ohm dual (per ch.) 1,300W @ 1kHz power, 1,090W @ 20Hz-20kHz power
4-ohm bridge-mono 5,000W @ 1kHz power
8-ohm bridge-mono 4,000w @ 1kHz power,
3,670W @ 20Hz-20kHz power
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo, 4 to 16 ohms in Bridge-Mono and 1 to 4ohms in
Voltage Gain to 1-kHz, 8-ohm rated output;
132:1 6% or 42 dB 1 dB gain at 0.775-volt sensitivity.
71:1 12% or 37 dB 1 dB gain at 1.4-volt sensitivity.
20:1 3% or 26 dB 0.25 dB gain at the 26-dB gain setting.
Required AC Mains: 50 or 60 Hz; 100-, 120-, 200-, 208-, 230-, 240-VAC (10%)
AC Line Current,
Current, voltage and frequency requirements are provided on the units back panel
At Idle: All units draw 90 watts or less
AC Line Connector: 10 AWG cord-set with NEMA TT30P plug is provided on 120 VAC, 60 Hz North American units
Frequency Response: 0.1 dB from 20 Hz to 20 kHz at 1 watt
Phase Response: 10 degrees from 10 Hz to 20 kHz at 1 watt
Better than 105 dB below rated 1-kHz power
Total Harmonic Distortion (THD): 1-kHz rated power, 0.05% or less true THD
Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) Less than 0.05% from rated power to 35 dB below rated power
Crown PIP and PIP2 modules including IQ-PIP modules.
Cooling: Internal heat sinks with on-demand, proportional forced-air cooling controlled by ODEP. Includes custom heat
diffusers and patented circuitry to promote uniform dissipation
Dimensions: 19" (48.3-cm) standard rack mount width (EIA RS-310-B), 5.25" (13.3-cm) height, 15.875" (40.3-cm) depth behind
mounting surface, and 2.875" (7.3 cm) in front of mounting surface. Allow 3 inches (7.6 cm) behind the back-panel for
Net Weight: 77lbs, 9 ounces (35.2 kg)
Shipping Weight: 88lbs, 10 ounces (40.2 kg)